Sequoia - Articles - Support for LISST-100 and LISST-ST to be discontinued

Support for LISST-100 and LISST-ST to be discontinued from 01/01/2011

[Sequoia, May 27, 2010]

Sequoia stopped building the LISST-100 and the LISST-ST in March 2004, more than 6 years ago. Those models were replaced by the LISST-100X and the LISST-STX. Due to the number of new instrument developments since then, as well as the fact that we no longer can get electronics spare parts for the LISST-100 and LISST-ST, we will discontinue most of our support for the LISST-100 and LISST-ST starting 01/01/2011. We do this so that we can better support the existing instrument models as well as new instrument developments.

Consequently, as of 1/1/2011 only the following support will be available for the LISST-100 and LISST-ST:
1) Batteries will be available for purchase
2) Users will still be able to get help with data analysis, data quality control etc. to the same extent that they have always had.

No other support, services or repairs of any kind will be offered for the LISST-100 and LISST-ST from 1/1/2011. However, most of the existing LISST-100 and LISST-ST’s can be upgraded to LISST-100X’s and LISST-STX’s. You can check here if your instrument can be upgraded. Please contact your local distributor for a quotation.

If you are in doubt as to what kind of instrument you have, look up the InstrumentData.txt file. This file resides in the same folder as the lisst.exe file, typically C:\Program Files\Sequoia\LISST100\ Open up the file in note pad and look for an X as the 5th value in that file. In the example below, sn 1219 is a LISST-100X, whereas sn 1134 is a LISST-100, as there is no ‘X’ in the InstrumentaData.txt file:

1219, c, 529000, 36000, X

1134, C, 529000, 27848

# # #

Questions about this article? Email us!